The SF Racing F3 flight controller is designed to provide flight experience of excellent performance for the hobbyists.
With verified sensor algorithm, it provides incomparable I/O capabilities. The SF Racing F3 runs a new-generation 32-bit STM32 F303CCT6 processor, an MPU6500 accelerometer and a gyroscope sensor, all high integrated on a lightweight PCB to improve the flight performance. In addition, it offers more practical functions to your aircraft.
What Makes It Powerful and Special:
•I/O ports can be connected to various devices like OSD, GPS, battery monitor and so on at the same time
•16 PWM I/O lines for ESCs, servos and legacy receivers.
•Fully supports OneShot ESCs for easy PID tuning.
•Supports SBUS, SFektrum1024/2048, PPM, PWM and XBus receivers and needs no external inverter (already has one built in).
•Dedicated programmable LED light strip provides a variety of signal lights for orientation, racing and night flying.
•Specific I2C port to connect an OLED display, needless of extra batteries.
•Selectable serial wire debug (SWD) and boot mode to ensure the bootloader not to be locked.
•Looptime is about 2 times of the previous STM32F1.
•Configuration of the flight controller can be done via a cross-platform GUI (Windows/OSX/Linux).
•Works with a variety of aircrafts like tricopters, quadcopters, hexacopters, octocopters, fixed-wing planes, etc.
1 * Introduction Leaflet
1 * SP Racing F3 Flight Controller
1 * 8x3-pin Straight Pin Header
1 * 8x3-pin Right-angled Pin Header
2 * 4-pin Header
2 * 2-pin Header
2 * 4-pin Anti-reversing Cable
2 * 8-pin Anti-reversing Cable
1 * 3- pin Anti-reversing Cable
1 * Case
5* Self-tapping Screw
The new-generation processor STM32 F3 incorporates hardware floating point unit for efficient flight calculations and faster ARM-Cortex M4 core, 2 times faster than STM32F1.
Extended I/O ports to simultaneously connect various devices such as OSD, Smartport, SBUS, GPS, LED light strip, etc.
Supports aircrafts including tricopters, quadcopters, hexacopters, octocopters, fixed wing aircrafts, etc.
Suitable for OneShot ESC and more than 8-channel RCs. Includes a programmable LED light strip for orientation.
Provided with introduction and application instructions as well as technical support.