External LED module, integrated with data interface, flat or upright various mounting orientations supported.
Sub trim and travel limit settings for servos, separate stick Rate and EXP settings for each mode.
Customizable hardware and software low pass filters for gyroscope and accelerometer, enable you to optimize the performance of the gyro as you wish.
Quick setup supported by using the programming card, firmware upgradeable.
Auto-Level mode and Auto-Hover mode.
6-position flight mode switching supported.
Size: 43.9 x 27.4 x 13mm.
Main Controller: 32-bit MCU.
Sensor: High-precision 3-axis gyroscope and 3-axis accelerometer.
Gyroscope Scale Range: ±2000 dps.
Accelerometer Scale Range: ±4g.
PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz.
Input Voltage: 4.8V ~ 8.4V.
Operating Temperature: -10 ? ~ 50 ? .
There might be a bit color distortions due to different computer resolutions.
There might be size errors due to different computer resolutions.
1 x A3 Super 3 Axle Airplane Gyro Gyroscope Flight Controller Stabilizer.
1 x Voltage Protector.
1 x Programming Card.
1 x USB Cable.
1 x USB Adapter.
1 x External LED module +1 x Connecor Cable.
3 x Receiver Wires.
4 x Tape Stickers.
The new A3 Pro is a high-performance and functional 6-axis gyroscope and stabilizer designed for R/C airplanes
This gyroscope can be used with nearly any size and type of R/C airplanes and it will make the flying even easier and comfortable
32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance
External LED module, integrated with data interface, flat or upright various mounting orientations supported
Customizable hardware and software low pass filters for gyroscope and accelerometer, enable you to optimize the performance of the gyro as you wish