drones-direct-logo
Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

F4 Flight Controller OMNIBUS Nano V3 FC With LC Filter 5V 2A Output Betaflight OSD Suppot 2-6S for FPV Racing Quadcopter Drone

Price: Click Button for Price
Product prices and availability are accurate as of 2019-05-20 14:56:49 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

General:
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V andamp; 12V outputs )
- 6 ESC outputs andamp; 1 pair VCC/GND pads
ESC outputs:
- Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V2A load)
- Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)
BEC 12V 3S LiPo
- Output voltage= 3S LiPo voltage -1V
Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, ?3mm
- Weight: 7.5g(without XT60), 11g(with XT60)
--------------------------------------------------------
Package Including
1 * Power Distribution Board PDB with 5V 12V Output Support up to 6 esc for X design FPV Racing Quadcopter Frame(with Amass XT60)

Product Features

The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*50mm 4 layers PCB. It distributes power from a LiPo pack to 6 ESCs, as well as providing synchronised regulated DC 5V outputs linear regulated DC 12V for powering Cameras, Servos, RC receiver, Flight Controllers, Video Transmitters, LEDs, etc. Total 6 pairs ESC solder tabs are fit for H or X type frame 5V 12V Output LED indicators Short circuit tolerant Mounting hole Suit for CC3D naze32 SP Racing F3 FC
View our full range of Droneacc products

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software