BETAFPV Z02 FPV Camera 480TVL CMOS OSD with Switchable 25mW 200mW Transmitter with SmartAudio for Tiny Whoop Blade Inductrix Racing Drone
Frequency band: 5362~5945MHz
Channel customer: 48
Modulation type: FM
Channel SEL: Touch Switch
Channel Indicate: CH1~CH8 Channel indication with 8LEDS and A~F frequency group Indicate with 6LEDS
Transmit power: 25mW /200mW /PIT MODE
Frequency control: PLL
All harmonic: Max -50dBm
Frequency Stability: ±100KHz (Typ.)
Frequency precision: ±200KHz (Typ.)
Channel Carrier error: 1dB
Antenna Port: 50 ?
Input format: NTSC
Sensor: NTSC:640X480 1/4"
Lens angle: H:120°/V:100°
Base-band interface: 1.25*5 pins
Power consumption: 250±20MA@5V DCIN
Operating Temperature:-10? ~ +60?
Profile dimension: 27mm*17mm*14mm
How to change frequency & channel & power:
Frequency group A~F selected still touch up to 2S.
Channel ch1~ch8 selected with short touch.
Power switch with long touch up to 5S.
1 * BETAFPV Z02 FPV Camera
1 * Holder
2 * Pins
BETAPFV Z02 FPV Tiny Whoop OSD Camera is customized for Micro FPV quadcopter like Tiny Whoop etc supporting OSD and SmartAudio. You can change the Frequency & Power on VTX through remote control.
Support touch switch select channel Frequency group. Output power of the transmitter is adjustable 25mW to 200mW with the voltage of 2.9V- 5.5V.
The Z02 FPV Camera has wide lens angle of 100 to 120 Degrees with 1/4 lens. Light Weight of 4.7g and Small Size of 27*17*14mm.
Support NTSC/PAL switch , Support vertical inverted image switch. 8LED display channel and 6LEDS display frequency group information.
Positioning pins designed to fit with BETAFPV Flight controller like F3 FC, F4 FC.