Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA Visit USA

XCSOURCE XT60 PDB Power Distribution Board 3A 5V/12V Dual-way BEC 6 ESC for Racing Drone Quad FPV RC415

Price: £4.98
Product prices and availability are accurate as of 2017-07-19 21:00:55 MDT and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Features:
The PDB-XT60 has been engineered to providethe highest possible performance and reliability.
It distributes power from a Lipo pack to 6 ECSc, as well as providing sybchronised regulated DC 5V outputs and linear regulated DC 12V output.
2oz copper to protect a large current, 4-layers 1.6mm PCB, high current power and BEC Stratification, avoid ground disturbance BEC power current.
Total 6 pairs ESC solder tabs, fit for H or X type frame, mounting hole suit for CC3D naze32 SP Racing F3 flight controller.
Built-in XT60 socket, you need to welded it on the sub-plate, LED indicators short circuit resistant.

Specifications:
General:
Input voltage range (3S-4S LiPo battery): 9 - 18V DC
Regulated 5V and 12V outputs
LED power indicators (5V & 12V outputs)
6 ESC outputs & 1 pair VCC/GND pads
ESC outputs:
Continuous current: 25A x 4 or 15A x 6
Peak current (10 seconds/minute): 30A x 4 or 20A x 6
BEC 5V output:
Designed for RC receivers, flight controllers, OSD, and servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2A (Max.2.5A 10s/minute)
Output ripple: 40mV (VIN=16V, VOUT=5V@2A load)
Short-circuit tolerant (5 seconds/minute)
BEC 12V output:
Designed for video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13-18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)
BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V
Mounting: 30.5 x 30.5mm, ?3mm
Dimension: 52 x 36 x 3mm (w/o XT60)

Package includes:
1 x XT60 PDB with dual BEC
1 x XT60

Product Features

The PDB-XT60 has been engineered to providethe highest possible performance and reliability. It distributes power from a Lipo pack to 6 ECSc, as well as providing sybchronised regulated DC 5V outputs and linear regulated DC 12V output. 2oz copper to protect a large current, 4-layers 1.6mm PCB, high current power and BEC Stratification, avoid ground disturbance BEC power current. Total 6 pairs ESC solder tabs, fit for H or X type frame, mounting hole suit for CC3D naze32 SP Racing F3 flight controller. Built-in XT60 socket, you need to welded it on the sub-plate, LED indicators short circuit resistant.

View our full range of Xcsource products

Alternative Product Links

If the product is out of stock, or you want to extend your search to include other online retailers,
Please try the alternative sites listed below.
Search Ebay For XCSOURCE XT60 PDB Power Distribution Board 3A 5V/12V Dual-way BEC 6 ESC for Racing Drone Quad FPV RC415
Search Aliexpress.com For Drones
Search GearBest.com For Drones

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software