- Built-in 8 pieces RGB LED WS2812B with 1 piece MCU
- Dual modes: MCU control and Cleanflight control
- MCU mode: 7 colors
- 4 status(Constant light, slow flash, fast flash, voilent flash)
- CF mode: Support CC3D, Naze32, etc. with cleanflight firmware
- How to use:
- 1. Connect the LED strip to 5V power source(Pin 5V & GND)
- 2. Press the button, scroll through 7 colors
- 3.Hold the button 2s to enter the setting of LED mode, then press thebutton to set it within MCU mode(the 1st LED Constant light, Slow flash,Fast flash, Voilent flash), CF mode(the 1st LED OFF)
- 4. The mode will be saved if no action within 5 seconds.
- 5. If MCU mode is choosed and saved, the color can be altered by pressing the button.
- 6. If CF mode is choosed and saved, please connect the DIN to the flight controller
- Working voltage range: 4.5-5.2V DC
- Mounting: 30mm, ?2.6mm
65 x 10mm/ 2.55 x 0.39inch
1 LED Board