LHI Power Distribution Board PDB-XT60 with 5V&12V Output Support up to 6 Esc for X or H Design FPV Racing Quadcopter

Price: £11.00
Product prices and availability are accurate as of 2017-08-15 04:19:24 MDT and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

General:

- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V & 12V outputs )
- 6 ESC outputs & 1 pair VCC/GND pads

ESC outputs:

- Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6

BEC 5V output:

- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
- Short-circuit tolerant (5 seconds/minute)

BEC 12V output:

- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (13~18V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo:

- Output voltage= 3S LiPo voltage -1V

Physical:

- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, ?3mm
- Weight: 7.5g(without XT60), 11g(with XT60)

Product Features

The PDB-XT60 has been engineered to provide the highest performance and reliability in a 36*50mm & 4 layers PCB. It distributes power from a Lipo pack to 6 ECSc, as well as providing sybchronised regulated DC 5V outputs linear regulated DC 12V for powering Camera,Servos, RC Receiver, Flight Controller, Video Transmitters, LEDs, etc. 5V & 12V Output LED indicators & Short circuit tolerant. Total 6 pairs ESC solder tabs are fit for H or X type frame. Mounting hole Suit for CC3D naze32 SP Racing F3 FC


Alternative Product Links

If the product is out of stock, or you want to extend your search to include other online retailers,
Please try the alternative sites listed below.
Search Ebay For LHI Power Distribution Board PDB-XT60 with 5V&12V Output Support up to 6 Esc for X or H Design FPV Racing Quadcopter
Search Aliexpress.com For Drones
Search GearBest.com For Drones

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software