Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA Visit USA

LHI 220-RX H210 H220 FPV Racing Quadcopter Frame Carbon Fiber +PDB XT60 Power distribution board 5V 12V Output Support 6 ESC

Price: £26.00
Product prices and availability are accurate as of 2017-07-24 05:40:39 MDT and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

H220 airframe£º
Material: Full Carbon Fiber
Diagonal length: 220mm
Net weight: 120g
Package weight:150g
Package Size: 230*10*4.5cm
Thickness: upper plate: 1.5mm
Bottom plate:2.0mm Arm plate:4mm

XT60 PDB:

General:
- Input voltage range (3S-4S LiPo operation): 9 - 18V DC
- Regulated 5V and 12V outputs
- LED power indicators ( 5V andamp; 12V outputs )
- 6 ESC outputs andamp; 1 pair VCC/GND pads

ESC outputs:
-Continuous current: 25A*4 or 15A*6
- Peak current (10 seconds/minute): 30A*4 or 20A*6
BEC 5V output:
- Designed for RC Receivers, Flight controllers, OSD, and Servos.
- DC/DC synchronous buck regulator.
- Voltage: 5.0 +/- 0.1VDC
- Continuous current: 2 Amps (Max.2.5A 10s/minute)
- Output Ripple: 40mV (VIn=16V, VOut=5V2A load)
- Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
- Designed for Video TX or FPV camera with linear regulator.
- The battery should be 4S LiPo (1318V DC)
- Voltage: 12.0 +/- 0.3VDC
- Continuous current: 500mA (Max.0.8A 5s/minute)
- Short-circuit tolerant (2 seconds/minute)

BEC 12V 3S LiPo
- Output voltage= 3S LiPo voltage -1V
Physical:
- Dimensions: 36 x 50 x 4 mm (without XT60)
- Mounting: 30.5 x 30.5mm, ¦µ3mm
- Weight: 7.5g(without XT60), 11g(with XT60)

Tips:other accessories£¨like Motor,ESC,Props) do not including.
Package Including:
1 * 220-RX H210 FPV Racing Drone Frame Carbon Fiber Quadcopter Frame
1 * PDb- XT60
1 * XT60 Matek PDB 12V 5V BEC 36*36mm

Product Features

With full carbon fiber material, perfect design to make the drone body featuring with light weight but very strong. X-structure is much more suitable for FPV racing drone,to reach high speed, violent move, more flexible and stable. With camera mount, perfect design for tilt angle of 25°-30° The PDB-XT60 has been engineered to providethe highest possible performance and reliability in a 36*50mm 4 layers PCB. It distributes power from a Lipo pack to 6 ECSc,as well as providing? sybchronised regulated DC 5V outputs linear regulated DC 12V for powering


Alternative Product Links

If the product is out of stock, or you want to extend your search to include other online retailers,
Please try the alternative sites listed below.
Search Ebay For LHI 220-RX H210 H220 FPV Racing Quadcopter Frame Carbon Fiber +PDB XT60 Power distribution board 5V 12V Output Support 6 ESC
Search Aliexpress.com For Drones
Search GearBest.com For Drones

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software