Please note :
1.The holder of the buoyancy rod needs to be fixed at 1/3 of the buoyancy rod
2.When the assembly is completed, it is necessary to test the balance in the water first, and check whether the position of the holder is appropriate.
3.Don't go to have wave of water of place, otherwise there will be danger of turning over, to fly in calm water place.
4.This landing gear only included 2 pieces of floating rings, but it can work perfectly according to test. Although the 4 clips can make your drone look more stable, this could affect the drone's flight, but if you need to 4 pieces, you can contact us
1 * fixed holder
1 * 1/4 screw
1 * 1/4 nut
2 * Buoyancy Stick
2 * Buoyancy bar fixed plus
1 * T4 box
(NOTE:ONLY SELL THE HOLDER,DOES NoT INCLUDE THE MAVIC PRO)
Buoyant rods can be installed to allow the Mavic Pro to take off and land on the water,it can allow let you play in the water or sea
Please note :Don't go to have wave of water of place, otherwise there will be danger of turning over, to fly in calm water place.
The screws and nuts can be installed 360 panoramic camera or GOPRO cameras and other related equipment (such as Gopro 4 / 5, SJ cameras S5 /SJ400 /SJ9000 etc.).
Protect your Mavic Pro drone on water surface when you flying over the water
Happily shooting video over the water and makes you flying have more fun