Commen Problem and The Solution:
1. Quadcopter lost connection to controller: Pull two function lever to bottom left for 3 seconds, then pull two function lever to bottom right for 3 second. Then try to mach code again;
2. Quadcopter can't lift up: Check the propeller to make sure it was installed correctly(diagonal propellers must be the same direction );
3. Motor not spin: Check the motor to see if anything stuck the motor(hair, string, etc)
4.Any questions, please feel free to contact us
Item name: E10C Mini RC Quadcopter with camera
Quadcopter Size: 60 x 60 x 28mm
Flight time: 5 - 6 minutes
Flight distance: about 20M
Charging time: About 35 minutes
Battery for quadcopter: 3.7V 150mah (included)
Battery for transmitter: 2 x AA battery (not included)
Camera: 2MP 720P
4 channel mini quadcopter.
6-axis flight control system with adjustable gyro sensitivity.
With 2.0MP camera can Video/Photograph.
Up / down / left / right / side flight / hover / flip / hand launch / 360°rolling.
3 flight speed mode.
Low voltage alarm.
Battery protection .
With LED light for night flight.
Memory card and card reader not included.
Notice and Tip:
The screw on the back for remote controller battery compartment is not included in the package The SD Card is not included in the package
Please turn off the quadcopter when charging
Before the drones are sent,they have a frequency test over the remote and the drone.But all the drone are definitely new products,please do not worry.
1 x Eachine E10C Mini RC Quadcopter With camera
1 x 2.4G transmitter
1 x 3.7V 120mah Battery
1 x USB charging cable
4 x spare blades
1 x User Manual
WITH 2.0MP CAMERA?Allows recording higher quality video or taking clearer images.
6-AXIS FLIGHT CONTROL SYSTEM:Based on 2.4 GHz remote control technology, so it can be controlled more precisely, its remote control distance is father, and the response is more sensitive.
HIGH/LOW SPEED-SHIFT: You can choose the gears according to your operation proficiency.
LED NIGHT LIGHTS:Colorful LED lights for night flight,When flying in the night sky, they are like the stars which blink and indicate the direction.
STEPS TO MATCH CODE: 1. Turn on the quadcopter then turn on the controller; 2. Push the throttle(left lever) to the top , and then pull it down; 3. When you hear a "Beep", which means the connection was set up successfully, and then you can start to fly your drone.