GEPRC-XT60 PDB Power Distribution Board with 3-6S Input 5V 12V Output Support the LC filter for FPV Racing Quadcopter Frame?with XT60 Integrated Plug?
GEP-XT60-PDB Is an integrated BEC 5v (3A) the 12v (0.5A) the output of the efficient PDB,The biggest characteristic is to use the LC filter design. Dispatch Escs output ripple interference to reduce to aminimum.
Structure of 4 layer board,35mm* 50mm size,can output 4x50A current at the same time.
5v output is designed for Flight Controller,VTX,Receiver,OSD.
12V output is designed Camera LED board.
2oz Copper foil,4 layer,1.6mm PCB.
Support the LC filter,reduce wave interference
PDB Output 50Ax4,Max.65A
BEC Output 5V(3A)and 12V(500mA)
Include XT60 plug
BEC 5V Output:
Designed for RC Receivers,Flight controllers,OSD,
DC/DC synchronous buck regulator.
Voltage:5.0 +/- 0.1VDC
Continuous current:2 Amps9(Max.2.5A 10s/minute)
Output Ripple:40mV 9VIn=16V, VOut=5V2A load)
Short-circuit tolerant(5 seconds/minute)
BEC 12V Output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4S LiPo (13~18V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute) BEC 12V3S LiPo Output voltage= 3S LiPo voltage -1V
Dimensions:36 x 50 x 4 mm (without XT60)
Mounting:30.5 x 30.5mm, ?3mm
Weight:7.5g (w/o XT60),11g(w/XT60) Package Including
1 * GEPRC-XT60 Power Distribution Board
GEP-XT60-PDB Is an integrated BEC 5v (3A) the 12v (0.5A) the output of the efficient PDB,The biggest characteristic is to use the LC filter design.Dispatch Escs output ripple interference to reduce to a minimum.
Structure of 4 layer board, 35mm* 50mm size, can output 4 * 50A current at the same time.
5v output is designed for Flight Controller, VTX, Receiver, OSD. 12V output is designed Camera and LED board.
GEPRC-XT60 Power Distribution Board with a XT60 Integrated Plug,this PDB can support 3-6S lipo battery.
This XT60 Integrated Plug can be used directly.