Crazepony-UK Sunrise BLHeli-S 4-in-1 20A Mini ESC LBEC 2-4S 36x36mm Mounting Hole Electronic Speed Controller 2-4S Lipo Input Special for FPV Racing Multirotor

Price: £38.99
Product prices and availability are accurate as of 2017-08-12 10:47:22 MDT and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
Availability: In Stock
Usually dispatched within 24 hours
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

Sunrise BLHeli-S 4-in-1 20A Mini ESC LBEC 2-4S 36x36mm Mounting Hole Electronic Speed Controller 2-4S Lipo Input Special for FPV Racing Multirotor
Specification
Item: BLHELI-S 4 IN 1 20A ESC LBEC
Con.Current:20A
Peak Current(10s):25A
BEC:5V 1.5A linear
Input:2 to 4S Li-Po
Programming :YES
Weight:19g
Size(PCB):36*36mm
M3 mounting hole? 20mm x 20mm

Features
BLHeli_S firmware is the next generation code, following the base BLHeli code.

BLHeli_S is designed for superior performance in multirotors, and uses hardware generated motor pwm for smooth throttle response and silent operation.

All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.

The code supports features to prevent sync loss. There are tuneable parameters that can make the code run well even in the most demanding situations, although default settings will work excellently in normal operating environments.

The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), Multishot (5-25us) and the latest Dshot600. The input signal is automatically detected by the ESC upon power up.
Package Including
1 * 20A Mini 4-in-1 BLHELI_S ESC
1 * Signal wire connector set with servo connections
1 * 6p mini signal wire
1 * Screw set

Product Features

This BLHELI_S 4-in-1 20A ESC design with a LBEC which can adjust the voltage,so you can connect it with a battery directly BLHELI_S 4-in-1 20A ESC has 20mm hole spacing to work with smaller flight controllers like Piko BLX.Very good for micro-size quadcopters with 1102-1105 motors,perfect on wheelbase 90-100 mini drone Small size 36*36mm combined with light weight only 19g for easy installation, the M3 mounting hole is 20mm x 20mm The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us), Multishot (5-25us) and the latest Dshot600. The input signal is automatically detected by the ESC upon power up. BLHeli_S firmware is the next generation code, following the base BLHeli code.


Alternative Product Links

If the product is out of stock, or you want to extend your search to include other online retailers,
Please try the alternative sites listed below.
Search Ebay For Crazepony-UK Sunrise BLHeli-S 4-in-1 20A Mini ESC LBEC 2-4S 36x36mm Mounting Hole Electronic Speed Controller 2-4S Lipo Input Special for FPV Racing Multirotor
Search Aliexpress.com For Drones
Search GearBest.com For Drones

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software