Have you seen our United States website? Visit USA today!
We also have websites for: Visit USA Visit USA Visit USA Visit USA Visit USA

BETAFPV F4 FC 1S Brushed Flight Controller DSMX Receiver ESC OSD Smart Audio for Tiny Whoop FPV Micro Racing Drone

Price: £43.99
Product prices and availability are accurate as of 2019-04-19 21:50:31 UTC and are subject to change. Any price and availability information displayed on http://www.amazon.co.uk/ at the time of purchase will apply to the purchase of this product.
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Product Description

With so many drone products discounted right now, it is great to have a make you can have faith in. The BETAFPV F4 FC 1S Brushed Flight Controller DSMX Receiver ESC OSD Smart Audio for Tiny Whoop FPV Micro Racing Drone is certainly that and will be a perfect birthday present.

For this reduced price, the BETAFPV F4 FC 1S Brushed Flight Controller DSMX Receiver ESC OSD Smart Audio for Tiny Whoop FPV Micro Racing Drone comes highly recommended and is always a popular choice with lots of people who visit our site. BETAFPV have included some excellent touches and this means great reasonable price.

Manufacturer Description


BETAFPV F4 FC 1S Brushed Flight Controller DSMX Receiver ESC OSD Smart Audio for Tiny Whoop FPV Micro Racing Drone
Please note the binding procedure is different from before, there is no bind button on it, just set in betaflight and then power on, turn on the radio and select bind mode, more details checking here:
https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board

Specification
CPU: STM32F411CEU6
Six-Axis: MPU6000
ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight MATEKF411RX 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: DSM2/DSMX (DSMX in default)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 3.8g

Package:
1 * F4 DSMX Brushed FC ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
1 * 55mm PH-JST 1.25 power cable pigtail

Product Features

BETAFPV F4 FC 1S Brushed Flight Controller Integrated DSMX receiver and OSD. NOT compatible with Spektrum DXe radio transmitter and OrangeRX RF module. For some Spektrum radio transmitter like DX6i/DX6e etc, the DSMX receiver may have a horrible range with your radio transmitter, please change the mode to DSM2 (DSMX in default). The binding procedure is different from before, there is no bind button on it, just set in betaflight and then power on, more details checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board The F4 brushed FC board bring a new era in FPV whoop technology. Improved on 3 points: STM32F411 100MHz high performance MCU, 30A lower resistance MOSFETs and polar reversed protection. All of these is backed by the same reliability and warranty of all BETAFPV FC boards. Fully programmable through Betaflight, using the onboard USB port, tune all the parameters, PID's, and rates to your perfect settings. The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector.
View our full range of Betafpv products

Write a Review

Fresh Store Builder - The Most Advanced Amazon Affiliate Software